Samsung VP-MS11 - Manual (Page 49)

ENGLISH
49 49
Setting the Miniket Photo : Setting the System
Setting the Mode Display
You can set to display the mode transition when you use the Mode Dial.
1. Turn the Mode Dial to the Settings mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Select by moving the joystick left / right.
4. Select the desired option by moving the joystick up / down and then press
the joystick (OK).
◆ : Turns the off.
◆ : Turns the on.
5. After you finish setting, turn the Mode Dial to the desired mode.
[ Note ]
✤ Turning on the Miniket Photo when the Mode Dial is not set to the proper mode position, only the
Samsung logo will appear. Turn the Mode Dial to a exact mode position.
3
4
Settings
Mode Display
Move Select
TYPE
Settings Settings
Mode Display Mode Display
Off
On
Move Move Select Select OK
TYPE
Settings Settings
Mode Display Mode Display
Off
On
Move Move Select Select
Settings
Mode Display
Move Select
OK
Settings
Mode Display
Move Select
Settings
Mode Display
Move Select
Setting
00934J VP-MS10 UK~053 6/17/06 6:22 PM Page 49