Siemens SX66 - Manual (Page 166)

SX66 User Manual 166
Resetting the SX66
You can perform a soft reset or a full reset . During a soft reset , the device is restarted and
only some data in opened programs may be lost. However, a full reset turns the battery off,
returns the device to its original factory settings, and deletes all programs, files, contacts
and other information you have saved to the device. Therefore, it is extremely important to
back up data to a storage card or your computer on a regular basis in the event that a full
reset has to be performed.
To perform a soft reset
If your SX66 responds slowly, stops responding, or freezes, you can soft reset it. A soft
reset causes the SX66 to restart and re-adjust memory allocation. Unsaved data in any
opened applications may be lost. Use the stylus to press and hold the Reset button, as
shown bellow.
To perform a full reset
A full device reset clears memory, deletes all data and restores the SX66 to its default set-
tings. Programs installed at the factory remain, erasing all data that you have created and
programs you have installed. Press and hold the power button, and then use the stylus to
press the soft reset button at the same time. Be sure you have backed up all your data in
a SD card or on your PC before performing a full reset.