Siemens SX66 - Manual (Page 119)

SX66 Phone User Manual 118 SX66 Phone User Manual 119
5. Select the Display a list of the known drivers for this device so that I can choose a
specific driver option, and then click Next .
6. Select Modem from the Hardware types list, and then Next .
7. Click the Have Disk button, and then Next .
8. Select the recognized USB Modem in the Models list, and then Next . After the installation
is completed, select Finish .
9. After the installation, a new USB modem will be found in the Modem list by tapping Start
> Settings > Control Panel > Phone and Modem Options on your PC.
10.Double click the USBModem_Dialer file on the SX66 Phone Companion CD and set the
GPRS settings (enter the APN assigned by your ISP ) in the blank text box and press Dial
to start the connection.
Connect via Bluetooth
Before starting to use your SX66 Phone as a Bluetooth modem, you must be sure that your
PC is a Bluetooth-enabled device. In addition, you still need to check the following:
n A GPRS SIM card is inserted in your SX66 Phone.
n Disable the ActiveSync BT port connection of your PC.
n Disable the Infrared function by tapping the Start menu > Settings > the Connections
tab > Beam . Uncheck Receive all incoming beams .
1. Select the Start menu > Programs > Wireless Modem .
2. Select the Bluetooth connection type from the drop-down list, and tap the Start button.
3. Open your SX66 Phone from the Bluetooth application installed on your PC.
The interface of the Bluetooth application installed on your PC will vary, depending on the
Bluetooth module embedded or attached in your PC when you purchased it. Follow the
installation instructions of the connected Bluetooth device's manual.