Spectrum Brands 72A-196BAREM Series - Manual (Page 7)

Installation and Operation Manual
Date: 6/02/2008 7
27-0027-0111
SCI P/N: 72A-196BAREM Series
72A-190BQREM Series
Electrical
Connections
• Depress rocker handle of all circuit breakers to “off” position.
Example: Breaker Off Example: Breaker On
• Connect input supply cord to a grounded power source rated for
the input voltage and current of the PDU.
• Connect equipment to AC output connectors. Continuous
current draw for all connected units must not exceed the current
rating per output.
Power source for PDU must be properly grounded.
Total current for all connected units must not exceed the
current rating per input.
Current must not exceed the current rating per output.
Do not conduct any DWV testing greater than 300 VAC.
•
•
•
•
CAUTION:
Input and Output
Connections
Input cord and output connections are located on the front side of the
unit. Pluggable mating connectors are not supplied with the unit.
Connections and Installation