Spectrum Brands 72A-196BAREM Series - Manual (Page 13)

Installation and Operation Manual
Date: 6/02/2008 13
27-0027-0111
SCI P/N: 72A-196BAREM Series
72A-190BQREM Series
Connections and Installation
Exit Configuration
Mode
Select 9 to exit the configuration mode without saving any changes, or
select 10 to exit and save all changes. All values are stored in
nonvolatile RAM. The LAN Module will automatically reset, but the state
of the PDU outputs will not be affected.
Run “digi_dev_disc.exe” utility to set up unit’s IP, if necessary. These are
part of the LAN tools.
Locate the update file.
A. If any network setting(s) on the LAN module are changed, you
must click to apply the changes.
B. Place the update file “image.bin” in C:\release.
C. In command window, navigate to C:\release directory.
Type “ftp ”.
D. Then log-in (User name is “root”, and password default is “1234”.)
E. Type “binary” and press [Enter].
F. Type “put image.bin” and press [Enter]. **Wait for the
completion message** Do not interrupt download.
G. Type “quit” after the “Transfer Complete” message appears. It may
take up to 1 minute, including PDU reboot.
H. In “C:\release\bin”, type “ping -t” until the
communication is re-established. Press [Ctrl+C] to exit ping.
LAN Module Reflash
Instructions