Spectrum Brands 72A-196BAREM Series - Manual (Page 22)

Installation and Operation Manual
SCI P/N: 72A-196BAREM Series
72A-190BQREM Series
Date: 6/02/2008 22
27-0027-0111
MAX and MIN data fields are calculated by the PDU.
To reset a MAX field, write a “0” (zero) to the data location.
To reset a MIN field, write “999” to the data location.
The data location will then refresh with new calculated values.
SNMP MAX and MIN
Data
Authorization: Changing public and private community
names is recommended to prevent unauthorized access to
the device.
You can disable SNMP set commands to make use of
SNMP read-only.
•
•
SNMP Security
Networking Functions
SNMP read community name “public”
SNMP read/write name “public”
You can access the SNMP settings using Telnet 9999.
The default username and password is “root” and “1234”, respectively.
Option 0 thru 3 on the Setup page:
Option 0 - Up to three SNMP trap addresses may be entered.
Option 1 - Read Community Name [default = “public”]
Option 2 - Read-Write Community Name [default = “public”]
Option 3 - SNMP Trap Destination Address
Key SNMP Settings