Savin 2555 - Manual (Page 76)

Changing the Paper Size
283
5
C
Square the paper and set it in the tray.
Important
❒ Do not stack paper over the limit mark.
❒ Make sure that the paper stack is flush with the right side fence.
Note
❒ Straighten the paper, if curled or warped, before placing it in the tray.
D
Set the paper size selector inside the tray to the new paper size.
To adjust the paper size to one not available with the paper size selector
A Set the paper size selector knob to the p mark on the left.
B Press the {
User Tools/Counter } key.
C Press the
[System Settings] key.
D Press the
[Paper Size Setting] key.
E Press the
[Tray 2:Paper Size Setting] key.
F Select your desired size. Then, press the
[OK] key.
G Press the
[Exit] key or press the { User Tools/Counter } key to exit the User
Tools.
ZBQY050E
ZBQY160N