Savin 2555 User Manual
Page 55
What to Do If Something Goes Wrong
262
5
Connect Copy
Because Connect Copy scans in all your originals into memory, if the number of
originals exceeds a certain limit, the machine will run out of memory.
Limitation
❒ If memory is full on either the master unit or sub-unit, Interrupt Copy will not
be available.
Note
❒ If you set “Memory Full Auto Scan Restart”of the User Tools to “Yes”, the
memory overflow message will not be displayed, but make Connect Copy for
the scanned original automatically. Connect Copy continues scanning and
copying until finishing the job. Note that copy sets will be printed out sepa-
rately by scanning at this time.
Machine Status
Action
The memory is full.
Press the
[Output]
key to copy scanned
originals and clear the scanning data.
Press the
[Clear]
key to clear the scanning
data and not copy.
The machine asks you whether you want
to scan the remaining originals.
To continue copying, remove all copies
then press the
[Resume]
key. To stop copy-
ing, press the
[Cancel]
key.