Savin 2555 - Manual (Page 41)

What to Do If Something Goes Wrong
248
5
Document Server
The number of sheets that
can be stapled has been ex-
ceeded. -- Check the stapler capacity.
See
⇒
P.60 “Staple”.
The machine cannot staple
this size of paper. -- Select the proper paper size
that can be used in Staple
mode. See
⇒
P.60 “Staple”.
This paper is not available
in Duplex mode. A paper size not available
in Duplex mode has been
selected. Select a paper size that can
be used in Duplex mode.
See
⇒
P.111 “Duplex”.
You cannot enter the de-
sired copy set number. The number of copies ex-
ceeds the maximum copy
quantity. You can change the maxi-
mum copy quantity that
you can make at a time. See
“Maximum Copy Quanti-
ty” in
⇒
P.313 “General Fea-
tures 2 /
3
”
Machine Status Problem/Cause Action
The machine asks you
whether you want to store
pages where scanning is
finished as 1 file. The number of scanned
pages exceeds the capacity
per file of the Document
Server. The maximum number of
pages per file you can store
is 1,200 pages in the Docu-
ment Server. To store pages
where scanning is finished
as 1 file, press the
[Yes] key.
To cancel scanning, press
the
[No] key.
Scanned pages became
over 1,200 pages per file. The number of scanned
pages exceeds the capacity
of the Document Server. The maximum number of
files or pages per file you
can store is 200 files or
1,200 pages in the Docu-
ment Server. Delete any
unnecessary files and then
scan the document again.
Machine Status Problem/Cause Action