Savin 2555 - Manual (Page 46)

If Your Machine Does Not Operate as You Want
253
5
The [Connect] key does not
appear on the display.
The “Connect Copy Mas-
ter” of the User Tools set-
ting is “No”. Change the setting to “Yes”
or press the
[Connect] key
on the other unit.
Reference
See “Connect Copy
Master” in
⇒
P.331
“Count Manager” .
The Connect Copy cable is
damaged. Contact your service repre-
sentative.
L indicator is lit. Follow the instructions
shown on the display.
The [Connect] key is grayed
out.
The master unit is now
copying or copying will
start as soon as the warm-
up finished. Press the master unit
{
Clear/Stop } key to cancel
copying.
Copying has stopped be-
cause there is a paper mis-
feed or toner has run out on
the unit you wish to use as
the master unit. Solve the problem on the
master unit.
Functions are programmed
that cannot be used with
Connect Copy. Press the master unit { Clear
Modes/Energy Saver } key to
clear the programmed
functions.
Reference
⇒
P.13 “Function List
Based on Options”
Machine Status Problem/Cause Action