Savin 2555 User Manual

Page 26

Using Connect Copy

233

If you use Batch (SADF) mode

A Set your originals and press the {

Start

} key. After all the previously set

originals are fed, set the next originals while the Auto Feed indicator is
lit.

B When all pages have been scanned in, press the {

} key. Copying starts

simultaneously in the master and sub-unit.

Note

❒ To stop originals from being scanned or copied, press the {

Clear/Stop

}

key on the master unit, then press the

[Cancel]

key following the instruc-

tions on the display.

Reference

See

⇒

P.36 “Batch (SADF) mode”.

If the size of scanned data exceeds memory capacity, the memory over-
flow message is displayed. Follow the instructions in “When Memory
Is Full”. See

⇒

P.262 “Connect Copy”.

Pick up your copies from the master unit and sub-unit.

Note

❒ The number of sheets and sets copied by the master unit and sub-unit may

be different.

❒ The master unit and sub-unit may not finish copying at the same time.
❒ When using the Sort/Staple function, copies are organized into copy sets.

If there is a paper jam in one machine during this process, it is not possible
for the other machine to take over the copy set processing of the down ma-
chine.

-Copy output order

❖

When copying in Sort/Staple mode

e.g., copying 6-sets of a 3-sheet original
• Copying with the master unit (face down output)—sub-unit (face down

output)