Savin 2555 - Manual (Page 47)

What to Do If Something Goes Wrong
254
5
If Connect Copy Is Cleared
Machine Status Problem/Cause Action
Exited Connect Copy. The master unit main pow-
er switch has been turned
off or the operation switch
has been pressed. Connect Copy is cancelled
and the display returns to
copy standby mode. On the
master unit, either turn on
the main power switch or
press the operation switch,
then press the
[Connect] key
and start your copy job
again.
Either the sub-unit main
power switch has been
turned off or the operation
switch has been pressed. A message requesting you
to check the sub-unit is dis-
played on the master unit.
Press the
[Cancel] key and
clear connect-copying. Ei-
ther turn on the main pow-
er switch on the sub-unit or
press the operation switch
and then press the
[Con-
nect] key.
The Weekly Timer function
has automatically turned
the master unit off. Press the master unit oper-
ation switch then press the
[Connect] key and copy.
Reference
See “Weekly Timer” in
the System Settings
manual.
An error message indicat-
ing a breakdown is shown
on the master unit display. L indicator is lit. Copying is not possible.
Follow the instructions dis-
played in the error mes-
sage.