Savin 2555 User Manual

Page 31

Connect Copy (Option)

238

❒ The print settings of the document you select first are applied to the

merged documents.

❒ If you select multiple files, you can confirm the file names or print order of

the files you selected in step

C by scrolling through the list with the

[

]

and

[

]

keys.

❒ Press the

[Select File]

key to return to the “Document Server: Files” display.

Reference

For details, see the explanations of each function in this manual.

Press the

[Connect]

key.

When the key darkens, the two units are connected.

Enter the required number of prints using the number keys.

Note

❒ Up to 999 can be entered.
❒ To change the value entered, press the {

Clear/Stop

} key and enter a new

value.

❒ If you print more than one set using the Sort function, you can check the

print result by printing out only the first set. See

⇒

P.218 “Sample Printing”.

Press the {

Start

} key.

Printing starts after the image data stored in the master unit has been trans-
ferred to the sub-unit.

Note

❒ The printing may take some time after transferring the image data to the

sub-unit.

❒ To stop originals from being printed, press the {

Clear/Stop

} key on the mas-

ter unit, then press the

[Cancel]

key following the instructions on the dis-

play.

❒ The number of sheets and sets printed by the master unit and sub-unit may

be different.

❒ The master unit and sub-unit may not finish printing at the same time.