Skuttle Indoor Air Quality Products 60-2 User Manual
Page 8
8
Tools and Materials Needed
1.
Safety goggles
2.
Tin snips or aviation snips
3.
Electric drill
4.
3/8" and 7/64" drill bits
5.
Pliers
6.
Screwdriver (medium flat point and Phillips #1)
7.
Level
8.
Hammer
9.
Small adjustable wrench
10. Center punch
11. Knife
12. Wire and hardware to connect Fan Control
13. Additional relay or fan sail switch as described under “Wiring the Air
Mover”
For some installations:
14. Duct tape
15. 1/4" copper water line
16. Tubing and fittings for the overflow connection
17. 2 conductor low-voltage wire