17 technical specifications (con't) – Scag Power Equipment STHM User Manual
Page 19
17
TECHNICAL SPECIFICATIONS (CON'T)
CUTTER DECKS
SM61A, SM 72A
Type:
Out-front design with anti-scalp roller and pneumatic shock
absorber for deck flotation
Construction:
10-gauge steel with 7-gauge (3/16") steel skirt
Cutting Width:
61.0 " (155.0 cm), 71.5" (181.6 cm)
Cutting Height Adjustment:
Adjustable from 1-3/4" to 5-1/4" in 1/4" increments
Cutter Blades:
.197 Thick, Milled Edge, Wear Resistant Marbain™
SM61A:Three (3) 21" blades
SM72A: Three (3) 24" blades
Blade Engagement:
Electric blade brake clutch with instrument panel switch
Lift System:
Patented manual winch with automatic brake/clutch,
stainless steel cable
Discharge Opening:
Extra wide 11.5", 13.75 " discharge opening with hinged
chute
Caster Wheels:
9 x 3.5 smooth tread flotation, inner tubes, split rims, roller
bearings, with quick pin removal
Spindles:
Cast housing, taper roller bearing, low maintenance with
top access grease fitting and grease overfill relief poppet
Pulleys:
Cast-iron with easily removed taper hubs
Cutter Deck Belts:
B-section with Kevlar cord
ADDITIONAL SPECIFICATIONS
Seat:
Foam padded, lever adjustment forward and back, with
padded arm rests
OPTIONAL ITEMS/ATTACHMENTS
Grass Catcher:
GCV/HD-44/6 Vacuum Grass Catcher with 6 HP engine, 44
gallon capacity, hard plastic cover, mounts on rear bumper
Mulching Kit:
Steel plate fits over discharge opening. No blade change
or removal required. Installs and removes in the field.
Electric Deck Lift:
Lift mounts to the side of the rider frame assembly to raise
and lower the deck at the flip of a switch.
Cup Holder:
12 Guage Steel with rubber retainer.
APPROXIMATE DIMENSIONS
SM61A
SM72A
Length:
113.0"
118.0"
Length with Grass Catcher:
137.0"
142.0"
Tracking Width:
50.0"
50.0"
Width:
70.0"
81.0"
Width (with discharge chute up):
63.0"
74.0"
Width with GCV grass catcher:
70.0"
84.0"
Height:
43.0"
43.0"
Height with GCV grass catcher:
51.5"
51.5"
Weight:
950 lbs.
1000 lbs.
Weight with GCV grass catcher:
1250 lbs.
1300 lbs.
Date of Issue: August, 2002
Specifications Subject To Change Without Notice