Scag Power Equipment SW32-15KAI User Manual
Operator’s manual, Walk-behind
PART NO. 03224 Rev. 2
PRINTED 1/2009
PRINTED IN USA
© 2009
Scag Power Equipment
Division of Metalcraft of Mayville, Inc.
Congratulations on owning a Scag mower! This manual contains the operating
instructions and safety information for your Scag mower. Reading this manual
can provide you with assistance in maintenance and adjustment procedures to
keep your mower performing to maximum efficiency. The specific models that
this book covers are listed on the inside cover. Before operating your machine,
please read all the information enclosed.
OPERATOR’S
MANUAL
SW
Walk-Behind
Model:
SW32-15KAI
SW36A-15KH
SW36A-16KAI
SW36A-17KAI
SW48V-15KH
SW48V-16KAI
SW52V-17KAI
This manual is related to the following products:
Table of contents
Document Outline
- SW Operator's Manual 03224 Rev 2
- GENERAL INFORMATION
- SAFETY INFORMATION
- SPECIFICATIONS
- OPERATING INSTRUCTIONS
- 4.1 CONTROLS AND INSTRUMENT IDENTIFICATION
- 4.2 SAFETY INTERLOCK SYSTEM
- 4.3 INITIAL RUN-IN PROCEDURES
- 4.4 STARTING THE ENGINE
- 4.5 GROUND TRAVEL AND STEERING
- 4.6 ENGAGING THE DECK DRIVE (CUTTER BLADES)
- 4.7 HILLSIDE OPERATION
- 4.8 PARKING THE MOWER
- 4.9 AFTER OPERATION
- 4.10 REMOVING CLOGGED MATERIAL
- 4.11 MOVING MOWER WITH ENGINE STOPPED
- 4.12 RECOMMENDATIONS FOR MOWING
- TROUBLESHOOTING CUTTING CONDITIONS
- ADJUSTMENTS
- MAINTENANCE
- ILLUSTRATED PARTS LIST
- LIMITED WARRANTY - COMMERCIAL EQUIPMENT