Smeg B988E - Manual (Page 5)

Instructions for the user
26
2.2 Mounting the oven
The oven is designed for mounting into any piece of furniture as long as
heat-resistant. Proceed according to the dimensions shown in figure.
Fixing is carried out using 4 screws at
the corners "C" of the oven door
frame, after removing the side panels
secured by the screws "A" and the
supports "B". To replace the side
panels, take care to engage the pins
inside them correctly with the supports
"B", then retighten the screws "A".
Never use the oven door to lever the oven into
place when fitting.
Avoid exerting too much pressure on the oven door
when open.