Sun Microsystems Sun Fire X4200 M2 - Manual (Page 21)

Chapter 1 Setting Up the Server Hardware 13
Cabling
Attach cables to the back panel connectors of your server as required. See FIGURE 1-11
or FIGURE 1-12 .
FIGURE 1-11 Sun Fire X4100/X4100 M2 Server Back Panel
FIGURE 1-12 Sun Fire X4200/X4200 M2 Server Back Panel
1. If desired, connect a USB keyboard cable to a USB connector.
2. If desired, connect a USB mouse cable to a USB connector.
3. If desired, connect a video monitor cable to the video connector.
Note – Keyboard, mouse, and video are optional with an operating system that
supports headless operation.
AC power connectors (2)
USB connectors (2) Video connector
SERIAL MGT port
Gigabit Ethernet ports (4)
Ethernet port
NET MGT
NET MGT
AC power connectors (2)
Ethernet port
NET MGT Gigabit Ethernet ports (4)
SERIAL MGT port
USB connectors (2) Video connector