Samsung ML-1630W Series - Manual (Page 28)

3 .7
Configuring the machine’s wireless network
Before starting you will need to know the SSID of your wireless network
and the Network Key if it is encrypted. This information was set when the
access point was installed. If you do not know about your wireless
environment, please ask the person who has set up your network.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, make sure cable
connection status.
1 Start a web browser such as Internet Explorer, Safari or Firefox and
enter your machine’s new IP address in the browser window.
For example,
2 When the SyncThru™ Web Service window opens, click Network
Settings
.
3 Click Wireless and Select Wizard. Then, click Next.
Note
Wizard will help you setup the wireless network
configuration. However, if you want to set the wireless
network directly, select Custom.
4 Select the one Network Name(SSID) in the list.
• SSID: SSID(Service Set Identifier) is a name that identifies a wireless
network. Access points and wireless devices attempting to connect to
a specific wireless network must use the same SSID. The SSID is
case-sensitive.
• Operation Mode: Operation Mode refers to the type of wireless
connections.
- Ad-hoc: allows wireless devices to communicate directly with each
other in a peer-to-peer environment.
- Infrastructure: allows wireless devices to communicate with each
other through an access point.
Note
If your network’s operation mode is Infrastructure, select the
SSID
of the access point. If the operation mode is Ad-hoc,
select the machine’s SSID. Note that “airportthru” is the
default SSID of your machine.