Sony MX-C400P - Manual (Page 58)

1-55
BEFORE USING THE MACHINE
REPLACING THE DEVELOPER CARTRIDGE
/ DRUM CARTRIDGE
Before replacing the developer cartridge or drum cartridge, turn off the main power of the machine and wait briefly.
REPLACING THE DEVELOPER CARTRIDGE
When it is time to replace a supply item, a message instructing you to replace the item will appear in the display. When
replacing a developer cartridge, carefully check the indicated color and replace the developer cartridge for that color.
It is also necessary to remove the developer cartridge in order to replace the drum cartridge. Refer to the procedure
below to remove the developer cartridge when replacing the drum cartridge.
Do not replace a supply item before the replacement message appears in the display.
1
Press the [POWER] key ( ) on the
operation panel to turn off the panel
power, and then switch the main power
switch to the off position.
2
Open the front cover and remove the
toner collection container.
☞
REPLACING THE TONER COLLECTION
CONTAINER
(page 1-52)
Do not point the holes down as used toner will spill out.