Sony MX-C400P - Manual (Page 249)

4-15
TROUBLESHOOTING
GENERAL PROBLEMS
PROBLEMS RELATED TO MACHINE OPERATION
• Specified machine functions cannot be used.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16
• The operation panel cannot be used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16
• Printing is not possible or stops during a job. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-17
• The displayed bypass tray paper size is not correct. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-17
PROBLEMS RELATED TO PAPER FEEDING AND OUTPUT
• The paper misfeeds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-18
• Paper does not feed from the paper tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-19
• The image on paper is skewed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-19
PROBLEMS RELATED TO QUALITY / PRINT RESULTS
• Lines appear in the printed image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-19
• Smudges appear on printed output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-19
• Toner does not adhere well or creases appear in the paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-20
• Print quality is poor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-20
• Part of the image is cut off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-20
• Printing takes place on the wrong side of the paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-20
• A cover or insert is not printed on the specified paper.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-20
PROBLEMS RELATED TO PERIPHERAL DEVICES
• The connected USB device cannot be used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21
• The connected USB memory cannot be used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21
• The finisher does not operate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21
• Stapling does not take place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21
• Output does not collect neatly in the output tray of the finisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21
• Stapled output does not collect neatly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22
OTHER PROBLEMS
• Preview images or thumbnail images do not appear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22
• The display screen is difficult to view.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22
• You were logged out without having performed logout yourself. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22
• You forgot the administrator password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22
• The actuator came off (when a finisher is not installed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-22
If you are unable to solve a problem using the solutions in this manual, switch off the [POWER] key ( ) and the main
power switch. Wait at least 10 seconds, and then switch on the main power switch and the [POWER] key ( ) in that
order.
Caution:
When the DATA indicator is lit or blinking, do not switch off the main power switch or unplug the power plug.
This may damage the hard drive or cause the data being stored or received to be lost.