Smeg WIL61BVM - Manual (Page 11)

Instruction for the user
13
5 DESCRIPTION OF FRONT PANEL CONTROLS
All the oven controls are grouped together on the front panel. The table below provides a description
of the symbols used.
FRONT RIGHT BURNER GAS OVEN THERMOSTAT KNOB
BACK RIGHT BURNER OVEN LIGHT / ROTISSERIE / GRILL SWITCH
BACK LEFT BURNER ELECTRIC OVEN FUNCTION KNOB
FRONT LEFT BURNER
If the cooker is equipped with an electronic programmer, before using the oven make sure
that the symbol
; appears on the display. See paragraph “8.1 Clock adjustment”.
BURNER IGNITION BUTTON (CERTAIN MODELS ONLY)
In the models fitted with this button, the flame is ignited by turning the
knob anticlockwise to the minimum flame setting , while
simultaneously pressing this button. To adjust the flame turn the knob
between maximum ( ) and minimum ( ). The burner goes out when
the knob is returned to the position .
COOKING HOB BURNER COMMAND KNOB
In models without the burner ignition button, the flame is ignited by pressing the
knob and turning it anticlockwise to the minimum flame setting . To adjust the
flame turn the knob between maximum ( ) and minimum ( ). The burner goes
out when the knob is returned to the position .
GAS OVEN THERMOSTAT KNOB
(CERTAIN MODELS ONLY)
This knob is used to ignite the gas burner inside the oven. The cooking
temperature is selected by turning the knob anticlockwise to the desired setting,
between Min. and 275°C.
For information on how to ignite the gas oven, see point “ 7.3 Use of the gas oven ”.
OVEN LIGHT / ROTISSERIE / GRILL SELECTOR KNOB
(CERTAIN MODELS ONLY)
This knob allows the user to activate the Grill / Rotisserie function or to switch on
the light inside the oven to check the point reached in cooking the food.
CAUTION: IT IS NOT POSSIBLE TO OPERATE THE GAS OVEN AND THE
GRILL / ROTISSERIE SIMULTANEOUSLY.