Siemens 30ISDN User Manual
Page 47
Programming the telephone settings
39
kap01.fm5
27.11.98
Profiset 30isdn engl.: A30853-X300-B107-1-7619
Clearing memory
You can clear any of the following memories via input of certain
codes:
●
“0“ clear the destination dialling memory
●
“1“ clear the speed dialling memory
●
“2“ clear the call list memory
●
“3“ clear the number redial memory
Checking the settings (status)
You can check the settings of your Profiset 30isdn. The display
shows the two-digit code (➔ page 27: ”Programming the tele-
phone settings“, ”Programming keys on the telephone“) which
you start each programming procedure with and the currently
set value. If the setting allows more than one value (e.g. MSN 1,
2 and 3, destination dialling keys 1 and 2, speed dialling keys 0-
9 a.s.o.) each memory and the relevant setting are displayed.
You can scroll forward and backward using the keys
+
and
-
.
The symbol “_“ on the display indicates values which are not
yet set (e.g. not assigned MSN, destination dialling or speed di-
alling keys)
You can view the current settings of the lock by entering the
code “30“. The values displayed under the codes “40“ and “41“
could be necessary if you contact the hotline.
a
Handset is on-hook.
S25
Start the programming procedure.
T
Enter the password if necessary.
0 ... 3
Press one of the keys 0 ... 3.
S
Exit the programming procedure. The selected memory
is cleared.
a or d
Handset is on-hook, or a call is in progress.
S00
Start the programming procedure.
T
Enter the password if necessary.
+ / -
Scroll through the settings via the +/- keys.
S
Exit the programming procedure.