Siemens 30ISDN User Manual

Page 20

Outgoing and incoming calls

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Accepting a call

The Profiset 30isdn rings with a particular call signal.

The calling party’s number appears on the display if it

is known.

You conduct the call via the handset and additionally you

can activate the open listening function (➔ page 17).

Alternatively, you can reject the call.

Rejecting a call (Disconnect)

Call forwarding

You can forward incoming calls for the first MSN to anoth-

er call number in order to be reachable even if you are not

close to your telephone. The incoming call is immediately

forwarded to the programmed call number. This means

that your telephone will not ring in this case.

You must apply to your local network operator for this fea-

ture. Inquire about the respective charges.

Call signal is heard.

Calling party’s number is displayed, if it is known.

c and d

Lift the handset and talk.

You can reject a call.

The call signal is heard but you do not want to take the

call.

You can reject the call via the Disconnect key. The caller

receives the busy tone and hears a corresponding mes-

sage from the switching system, if possible.

Handset is on-hook.

Press the Call forwarding key.

The call forwarding symbol X on the display indicates

that call forwarding is activated.
Call forwarding is deactivated if you press the

Call forwarding key again.

Prerequisite for call forwarding is a call number

for call forwarding (➔ page 34) and the first

MSN (➔ page 31) have been programmed.