Siemens 30ISDN - Manual (Page 19)

Outgoing and incoming calls
11
kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619
Dialling call numbers using the Speed dialling keys (automatic dialling)
10 frequently used call numbers can be dialled quickly and
easily using Speed dialling keys. Speed dialling is also pos-
sible with the handset on-hook. The call number can be
edited if necessary (➔ page 9). You can also store parts of
numbers and the remaining digits can then be suffix-di-
alled as required.
Prerequisite: You must have programmed a Speed
dialling key (➔ page 25).
or
a Handset is on-hook.
z
Press the Destination dialling key. The stored call number
is displayed.
- or T Edit or complete the call number if necessary.
c Lift the handset. The call number is dialled.
c
Lift the handset.
k and T
Press first the Speed dialling key and then the relevant
digit key. The stored call number appears on the display
and is dialled.
or
a Handset is on-hook.
k and T
Press first the Speed dialling key and then the relevant
digit key. The stored call number is displayed.
- or T Edit or complete the call number if necessary.
c Lift the handset. The call number is dialled.
In order to select a specific network operator,
program the relevant circuit identification code
on a destination or speed dialling key. The re-
maining number can be suffix dialled from an-
other destination or speed dialling key, the call
list key, the number redial key or via the digit
keys.