Siemens Gigaset 4015 - Manual (Page 42)

36
Press Keys:
Handset Operation
Handset Operation
You can register and operate up to three handsets
at the Gigaset 4015 base station.
Registering and Deregistering
Handsets
The handset that comes with the system is auto-
matically registered with the base station. To regis-
ter additional handsets, follow the procedures de-
scribed in this chapter.
Automatic Registration
Automatic registration is possible for only the sup-
plied handset and any additional
Gigaset 4000 or 4200 handsets. Before using your
handset, turn it off and place it in the base station
with the display facing you. After approximately one
minute, the handset will be registered and its inter-
nal (intercom) number is shown (for example, 2).
Up to two additional handsets may be added to the
system for a total of four handsets.
The next unassigned intercom number (2 through
3) is automatically assigned to the handset. If all
numbers are assigned, the intercom number 43 is
reassigned.
1
. . .
2 3
F