Siemens Gigaset 4015 - Manual (Page 14)

8
Press Keys:
Date and Time
Date and Time
Setting the Date and the Time
The date and time settings are necessary in order
for the date and time of the arrival of messages/in-
coming calls to be displayed correctly. If you sub-
scribe to Caller ID, the time and date will be auto-
matically set with the first incoming call. If not,
manually set by using the steps below. You can also
set the clock mode, to the 12 hour mode (AM and
PM) or 24 hour mode.
Date
NNNNNNNNNNNN
MENU Open the Menu.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
BASE SETT Scroll to Base Setting and press OK.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
CLOCK Scroll to Clock and press OK.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
DATE Select Date and press OK.
The current setting is displayed in the MM-DD-YY
mode.
For example:
L0-0L
Enter the month/day/year (for example, 05-25-01 as
shown).
NNNNNNN NNNNNNN If necessary, skip to a digit to correct it.
NNNNNNN Save the setting by pressing OK.
Time
NNNNNNNNNNNN
MENU Open the Menu.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
BASE SETT Scroll to Base Setting and press OK.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
CLOCK Scroll to Clock and press OK.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
TIME Scroll to Time and press OK.
• The default setting is 12 hour mode.
• If you subscribe to Caller ID the date and
time may be sent from your telephone ser-
vice and will be automatically set.
• If you want to voice stamp your answering
machine, you must set the date and time.