SMC Networks VDSL2 - Manual (Page 28)

A
BOUT THE
T
IGER
A
CCESS
EE S
WITCH
1-8
Console Port
The console port on the switch’s front panel is a DB-9 connector that
enables a connection to a terminal for performing switch monitoring and
configuration functions. The terminal may be a PC or workstation running
terminal emulation software, or a terminal configured as a Data Terminal
Equipment (DTE) connection. A null-modem wired serial cable is
supplied with the switch for connecting to this interface.
Ethernet-over-VDSL CPE (Optional Equipment)
The VDSL switch is designed to connect to the RJ-11 VDSL Line port on
a CPE. The CPE provides users with a high-speed Internet connection via
the RJ-45 Ethernet port and a standard telephone connection via the
RJ-11 phone jack.
Port and System Status LEDs
The switch includes key system and port indicators that simplify
installation and network troubleshooting. The LEDs, which are located on
the front panel for easy viewing, are shown below and described in the
following table.
Figure 1-3 Port and System LEDs
1
2
3
4
5
6
7
8
9
10
11
12
14
13
15
16
17
E
O
18
E
O
Power
Fault
Diag
Mgmt
L