Siemens SL2-141-I - Manual (Page 6)

6
Step 3:
USB driver installation
The USB driver is only working on the following operating system (OS):
Windows 98, Windows 98 SE, Windows ME, Windows 2000 and Windows XP.
If your ADSL WLAN Router is NOT equipped with an Ehternet interface you have to install first
the USB driver in order to be able to configure your ADSL WLAN Router. For the driver installa-
tion proceed as follows:
Windows 98 users need the Windows 98 CD-ROM to complete the
installation.
1. Insert the SIEMENS installation CD-ROM in your CD-ROM drive.
The CD will be startet automatically.
In case the “setup wizard” does not start automatically, open a Run window via
Start --> Run and enter the path x:\USB_Driver\windows\setup.exe, where x repre-
sents the drive letter of the CD drive.
2. Click on Run or Setup.
3. Connect the USB cable to your ADSL WLAN Router. The driver will be installed auto-
matically.
Note for Windows 98 users: If prompted, you need to insert the Windows 98 CD-
ROM in your CD-ROM drive to complete the installation.
4. You will be asked whether the PC should be restarted. Click on Close.
5. Click on Finish.