Siemens SL2-141-I - Manual (Page 4)

4
Connect the ADSL WLAN Router to the exchange connection
1. Remove the plug on the telephone or the fax machine from the telephone socket.
2. Insert the ADSL-Splitter into the telephone socket. Plug the plug of the ADSL-Splitter cable
(enclosed, mostly black) into the “Phone” (F) plug of the telephone socket and the other
plug into the “Line” (Amt) plug of the ADSL-Splitter.
3. Set up the connection between the ADSL-Splitter and the ADSL Modem. To do this, insert
the end of the ADSL cable (gray) into the socket of the ADSL-Splitter with the "DSL"
(Modem) symbol.
Insert the other end of the ADSL cable (gray) into the socket on your ADSL WLAN Router
marked "DSL".
4. Set up the connection between the ADSL-Splitter and the ISDN-NT. To do this, insert the
available phone cord (same construction as the ADSL-Splitter cable) into the middle plug of
the ADSL-Splitter. The middle plug is marked with a none crossed symbol of a phone.
Connect the end of the phone cable into the “Line” plug of the ISDN-NTBAs.
4.
3.
2.
4.
Telephone socket
ADSL-Splitter
2.
3.
to the SIEMENS SL2-141-I ADSL WLAN Router