Juniper Networks RELEASE 8.1.X E320 - Manual (Page 45)

Appendix A
IOA Protocol Support
This appendix lists the layer 2 and layer 3 protocols and applications that IOAs support
in combination with the listed LM. IOAs are identified by their physical labels. See
Table 1 on page 3 for a list of IOAs and their identifying labels.
The designation “not yet fully qualified” that appears in some tables in this appendix
indicates that support for the protocol or application on the specified IOA has not
yet been fully qualified by Juniper Networks. If you use a feature before it has been
fully qualified, it is your responsibility to ensure that it operates correctly in your
targeted configuration.
This appendix contains the following sections:
■ Ethernet IOAs on page 45
■ OCx/STMx ATM IOAs on page 53
■ OCx/STMx POS IOAs on page 56
■ Service IOA on page 59
Ethernet IOAs
Table 16: Ethernet IOAs with ES2 4G LM
ES2–S1 10GE IOA (with ES2
4G LM) ES2–S1 GE-8 IOA (with ES2
4G LM) ES2–S1 GE-4 IOA (with ES2
4G LM)
Protocol or Application
Yes Yes Yes Accepts traffic destined for
GRE tunnels or DVMRP
(IP-in-IP) tunnels
No No No APS/MSP
No No No ATM
No No No BERT
Yes Yes Yes BGP
Yes Yes Yes BGP/MPLS VPNs
No No No Bridged Ethernet
Ethernet IOAs ■ 45