Juniper Networks RELEASE 8.1.X E320 - Manual (Page 40)

OC48/STM16 POS IOA
ES2-S1 OC48 STM16 POS IOA IOA label
■ 1 Number of IOA ports
■ First supported: 7.0.1 Software release
■ 30 W
■ Half-height module
■ See Slot Combinations on page 63 for more information on combining IOAs in
a slot.
■ Unchannelized, concatenated OC48/STM16 for POS
Description
■ OC48/STM16
■ HDLC framing
Capability
■ See OCx/STMx POS IOAs on page 56 for information about the layer 2 and layer
3 protocols and applications that this module combination supports. Software features
■ ES2 4G LM Line module compatibility
■ SRP-100
■ SRP-320
SRP module compatibility
■ Can be paired with an ES2 4G LM.
■ Must be installed in the same redundancy group as an ES2 4G LM and ES2–S1
REDUND IOA combination.
Line module redundancy
compatibility
■ Yes (Redundancy IOA must be installed in either slot 0 or slot 11) Module redundancy support
■ Not applicable Port redundancy support
■ Up to one LC full duplex connector
■ Transmit power:
■ min: –10 dBm
■ max: –3 dBm
■ Center wavelength: 1310 nm
■ Receive input power:
■ min: –18 dBm
■ max: –3 dBm
■ Rated for 2 km (1.2 miles) of 9-micron core cable
■ See E320 Hardware Guide, Chapter 5, Cabling the Router for more information.
Cables and connectors
(single-mode short reach [SR-1])
40 ■ OC48/STM16 POS IOA
E320 8.1.x Module Guide