Oc12/stm4-2 atm ioa – Juniper Networks RELEASE 8.1.X E320 User Manual
Page 35
OC12/STM4-2 ATM IOA
ES2-S1 OC12-2 STM4 ATM IOA
IOA label
■
2
Number of IOA ports
■
First supported: 7.0.1
Software release
■
40 W
■
Half-height module
■
See Slot Combinations on page 63 for more information on combining IOAs in
a slot.
■
Uses a range of small form-factor pluggable (SFP) transceivers to support different
modes and cable lengths.
Description
■
OC12/STM4
■
ATM
Capability
■
See OCx/STMx ATM IOAs on page 53 for information about the layer 2 and layer
3 protocols and applications that this module combination supports.
Software features
■
ES2 4G LM
Line module compatibility
■
SRP-100
■
SRP-320
SRP module compatibility
■
Can be paired with an ES2 4G LM.
■
Must be installed in the same redundancy group as an ES2 4G LM and ES2–S1
REDUND IOA combination.
Line module redundancy
compatibility
■
Not applicable
Port redundancy support
■
Up to two LC full duplex connectors
■
Transmit power:
■
min: –15 dBm
■
max: –8 dBm
■
Center wavelength: 1310 nm
■
Receive input power:
■
min: –28 dBm
■
max: –7 dBm
■
Rated for 2 km (1.24 miles) of 9-micron core cable
■
See E320 Hardware Guide, Chapter 5, Cabling the Router for more information.
Cables and connectors
(single-mode short reach [SR])
OC12/STM4-2 ATM IOA
■
35
OC12/STM4-2 ATM IOA