Disc operations – JVC KW-NT1 User Manual
Page 51
51
ENGLISH
~
Insert a disc.
The source changes to “DISC” and playback starts.
Disc operations
The disc type is automatically detected, then playback starts (for some discs, the top menu of the disc appears).
If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
• You can fully enjoy multi-channel sound by connecting an amplifier or a decoder compatible with these multi-
channel sources. (
☞ also page 75)
Label side
If “
” appears on the screen, the unit cannot accept the operation you have tried to do.
• In some cases, without showing “
,” operations will not be accepted.
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
Caution on volume setting:
To eject a disc
• You can eject a disc when playing other AV source.
To prohibit disc ejection
1
2
Press and hold AV MAP and any part of the
screen.
A confirmation message appears. Press [Yes] to confirm
the operation. Press [No] to cancel.
To cancel the prohibition, repeat the same
procedure.
+
[Hold]
[Hold]
On <AV Menu>
EN_KW-NT1[J]f.indb 51
EN_KW-NT1[J]f.indb 51
09.3.24 6:19:51 PM
09.3.24 6:19:51 PM