JVC TM-1051DG - Manual (Page 16)

16
How to Use SET-UP MENU
(cont.)
Sets the items related to the
display screens, such as
the status display or the
AUDIO LEVEL METER
display (see below).
7 STATUS DISPLAY
Sets the status display.
• AUTO/MANUAL/OFF
☞ “About the status display” on page 5
OVER LEVEL
[–10dB/–8dB/–6dB/
–4dB/–2dB]
REFERENCE LEVEL
[–20dB/–18dB]
Audio channels and OVER/
REFERENCE LEVEL indication
The following items are the settings for the AUDIO
LEVEL METER display.
7 LEVEL METER ch
Selects the audio channels used in the AUDIO
LEVEL METER display.
• OFF/1:2/12:34/31:24/123:456/1-8
NOTES:
• This item does not appear on the menu when both of
the following conditions are applied:
– When selecting “L. METER” to a pin terminal of the
MAKE/TRIGGER terminal and “MAKE” to
“CONTROL FORM” of “REMOTE SYSTEM” in SET-
UP MENU.
– When activating the external control.
☞ “REMOTE SYSTEM” on page 14, “How to Use the
External Control” on pages 18 and 19
• Numbers indicate the audio channel. The channel
input level indicated on the left side of “:” is displayed
on the left side of the screen, and the channel input
level indicated on the right side of “:” is displayed on
the right side of the screen.
• The AUDIO LEVEL METER display does not appear
when this item is set to “OFF.”
DISTORTION ADJ.
Compensates the picture
distortion, tilt, and the color
heterogeneity caused by
the geomagnetic influence.
7 PARALLELOGRAM
Compensates the parallelogram picture distortion.
• –20 O 00 O +20
–: Moves the upper side of the picture to the
right, and the lower side to the left.
+: Moves the upper side of the picture to the
left, and the lower side to the right.
7 TRAPEZOID
Compensates the trapezoid picture distortion.
• –20 O 00 O +20
–: Enlarges the upper side of the picture.
+: Reduces the upper side of the picture.
7 ROTATION
Compensates a picture tilt.
• –31 O 00 O +31
–: Turns the picture clockwise.
+: Turns the picture counterclockwise.
7 PURITY
Depending on the location of the monitor, there may
be color heterogeneity around the edge of the
screen caused by the geomagnetic influence.
You can avoid this color heterogeneity with this
function decreasing the geomagnetic influence.
• –31 O 00 O +31
Setting the AUDIO LEVEL METER display
You can check the conditions of the current
EMBEDDED AUDIO signals on the AUDIO LEVEL
METER display.
AUDIO LEVEL METER display example
LEVEL METER ch: 1-8, BAR TYPE: 3COLORS
STATUS DISPLAY
EN04_LCT1993-001A-f.p65 06.1.5, 18:24 16