JVC TM-1051DG - Manual (Page 10)

10
7About “ sub menu”
When “ sub menu” is displayed in the menu, only
selected item in that menu can be displayed and
adjusted. This allows you to make adjustments while
looking at the actual screen.
1. Select “ sub menu,” then move the
MENU control to .
The adjustment bar is displayed at the bottom or top
of the screen.
2. Move the MENU control to / to
select the item you want to set.
3. Move the MENU control to / to
make adjustments.
To exit the sub-menu display:
Press the MENU control.
To change the positions and the contents of the
sub-menu display
Select “sub menu SELECT” in MAIN MENU, then change
the setting by moving the MENU control to
/ .
UPPER1: The current setting and adjustment bar
appear at the top of the screen.
LOWER2: The current setting appears at the
bottom of the screen.
UPPER2: The current setting appears at the top
of the screen.
LOWER1: The current setting and adjustment bar
appear at the bottom of the screen.
7About “reset”
Restores all menu settings (currently displayed) to
factory-preset values.
1. Move the MENU control to / to select
“reset,” then move it to .
Confirmation message is displayed.
2. To initialize, move the MENU control to .
• To cancel the initialization, press the MENU
control.
NOTE:
• This function is only available when “reset” is displayed in
the menu.
7Displaying the Menu
Screens
To display MAIN MENU
Press the MENU control on the front panel.
To display SET-UP MENU
Press the CHROMA/PHASE button while moving the
MENU control to .
NOTES:
• To exit the menu, press the MENU control several times.
• The menu automatically exits about 30 seconds after the
last menu operation.
• To go back to the previous menu, press the MENU control.
7Menu Operation Procedure
1. Press the MENU control.
MAIN MENU is displayed on the screen.
2. Move the MENU control to / to
select the item you want to set, then
move it to
.
The menu screen of the selected item is displayed
on the screen.
(Ex.)
3. Move the MENU control to / to
select the item you want to adjust.
4. Move the MENU control to / to
make adjustments.
(Ex.)
5. Press the MENU control several times to
exit MAIN MENU.
Basic Menu Operations
(cont.)
EN03_LCT1993-001A-f.p65 06.1.5, 18:25 10