JVC BR-DV6000 - Manual (Page 56)

56
OFF
TIMER
REC PLAY
VIDEO
LINE
IN
OUT
MONITOR
OUT
DC12V
DV IN/OUT
IN OUT OFF
AUDIO
REMOTE2
IN B-Y R-Y
SYNC IN TIME CODE IN OUT
Y
COMPONENT
OUT CH 1/3 CH 2/4
IN
OUT
MONITOR
OUT REMOTE1
TIMER
REC PLAY
SERIAL
REMOTE SIGNAL GND
Y/C
BR-DV6000
PROFESSIONAL MENU RESET DISP
SET SEARCH+
BLANK CUE UP HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
CH1/3
NDF 12
H
34
M
34
S
10
F FREE
CH2/4
STOP SP222 min
01/02/03
01:23:45
INS AM
OVER
48k
TC
L dB 0 10 20 30 40
OVER
W
Y/C
VA
SYNC
r
e
CF
Memo
Use an external timer ex-
clusively to control the VCR
operation.
If the power is cut off by an
external timer and the VCR
operation stopped while
the tape is running,
BR-DV6000 or the tape
may be damaged.
PLAYBACK – External timer playback –
The unit can start playing automatically when the power is supplied. Using a commercially avail-
able timer, playback can start at a pre-determined time.
DISP button
LCD Display
Timer symbol
Ⅵ Connect the supplied AC adapter.
To set the power supply power to be activated by a timer, plug the
power cord of the AC adapter to the power output terminal of the
timer.
1.
Load the tape for playback.
2.
With REPEAT MODE in the SYSTEM (1/2) Menu screen, whether
to enable/disable repeat playback, and the type of repeat play-
back, can be selected.
3.
Set the TIMER switch on the rear panel to “PLAY”.
If the DISP button on the front panel is pressed
to change the LCD display to the enlarged
mode, the timer symbol lights up in green.
4.
Set up the time, etc., of the external timer.
When the power is supplied to the unit, playback starts automati-
cally. If the repeat playback mode is selected, repeat playback is
executed.
5.
To stop playback, press the STOP button.
6.
To stop the external timer playback mode, set the TIMER switch
to “OFF”.
The timer symbol of the LCD disappears.
Supplied AC adapter
Timer
DC IN
terminal
TIMER switch
DV6000U_52-071_Eng.p65e 06/03/03, 11:40 PM 56