JVC BR-DV6000 User Manual

Page 19

[SERIAL REMOTE OUT] terminal
(mini jack)

• This terminal is for direct through-output of

serial commands of the serial remote input
terminal. (Only with OPERATE ON)

• If REPLICATION of the SYSTEM (2/2) Menu

screen is set to SERIAL, this terminal out-
puts REC commands when BR-DV6000 be-
gins playback. (REPLICATION mode)Use this
function to connect BR-DV6000 to a dubbing
device for dubbing its playback video or play-
back sound.

‹

[REMOTE 1] RS-422A terminal
(D-SUB 9-PIN)

This terminal is for connecting to an RS-422A

serial interface-compatible editing remote con-
troller (e.g. RM-G820).

With this terminal, BR-DV6000 can be used as
a player or recorder of an editing system.
To operate BR-DV6000 with RS-422A, perform
the following settings.

• Set REMOTE SEL 9-PIN in the REMOTE (1/

2) Menu screen to “ON”.

• Set the

REMOTE / LOCAL switch on the

front panel to “REMOTE”.

Memo

● Use screws, of the inch, not metric, system,

for fastening the connectors.

● This part can be replaced by the RS-232C

serial interface board SA-K46U (sold sepa-
rately).
Consult your JVC authorized service agent
for such replacements.

›

[REMOTE 2] JVC Bus terminal
(12-PIN)

This terminal is for connecting to the JVC bus
interface-compatible editing remote controller
(RM-G800, RM-G805).
With this terminal, BR-DV6000 can be used as
a player or recorder of an editing system.
To operate BR-DV6000 with this terminal, per-
form the following settings.

• Set REMOTE SEL JVC in the REMOTE

(1/2) Menu screen to “ON”.

• Set the

REMOTE / LOCAL switch on the

front panel to “REMOTE”.

ﬁ

Slot cover for an optional board

This cover can be removed to install any of the

following optional boards.
• SA-DV6000 network board
• SA-X61U AUDIO XLR IN board (2ch)
• SA-X62U AUDIO XLR OUT board (2ch)

Memo

● With the SA-X61U AUDIO XLR IN board in-

stalled, whether sound signals are input to
the XLR IN terminal or the AUDIO IN termi-
nal can be selected with AUDIO INPUT SEL
in the AUDIO MENU. If the MIC terminal is in
use, the MIC terminal precedes.

● With the SA-X62U AUDIO XLR OUT board

installed, the audio channel to which signals
are output can be selected with the AUDIO
OUTPUT switch.

DV6000U_02-027_Eng.p65e

06/03/03, 11:39 PM