Phone menu, English 88, Menu items selectable settings – JVC KD-NX5000- User Manual
Page 88
ENGLISH
88
Phone Menu
Menu items
Selectable settings
(Initial setting)
Dial
*1
Redial
Select a phone number from the list of the phone numbers you have
dialed.
Received Calls
Select a phone number from the list of the received calls.
Phonebook
Select a name, then phone number from the phone book of the
connected cellular phone.
Missed Calls
Select a phone number from the list of the missed calls.
Phone Number
Enter the phone number.
Voice
If the connected cellular phone has the voice recognition system, you
can call by voice command.
Message
*2
You can read a message from the following message histories.
Unread: Messages you have not read.
Read: Messages you have read.
Unsent: Messages you have not sent.
Sent: Messages you have sent.
Open
*3
Only for New Device.
Make the unit ready to establish a new Bluetooth connection. Select
this when establishing a Bluetooth connection with a device for the
first time, mainly from the device. ☞ [84]
• Once the connection is established, it is registered in the unit. You
can connect the unit and the device by using Connect (☞ [89])
from the next time.
Search
*3
Only for New Device.
Make the unit ready to establish a new Bluetooth connection. Select
this when establishing a Bluetooth connection with a device for the
first time, mainly from the unit. The unit searches for available new
devices. ☞ [84]
• Before starting a search, turn on the Bluetooth function of the
device so that the unit can detect it.
• Once the connection is established, it is registered in the unit. You
can connect the unit and the device by using Connect (☞ [89])
from the next time.
Special Device
*3
Only for New Device.
Shows the list of Bluetooth devices which requires some special
procedure to establish Bluetooth connection. Select a device you want
to connect. ☞ [84]
• After selecting the device, use Open or Search (☞ above) for
connection.
• Once the connection is established, it is registered in the unit. You
can connect the unit and the device by using Connect (☞ [89])
from the next time.
KDNX5000_J.indb 88
KDNX5000_J.indb 88
23/1/07 7:00:57 pm
23/1/07 7:00:57 pm