46 english – JVC KD-NX5000- User Manual

Page 46

ENGLISH

Menu items

Selectable settings

(Initial setting)

System Setting

Installation
Angle

Select the angle of the unit measured by the supplied gauge. (See
also the Installation/Connection Manual.)
1: –5.0° to 1.0°
2: 1.0° to 6.0°
3: 6.0° to 14.0°
4: 14.0° to 32.0°
• It is not recommended to install the main unit at an angle of

more than 30˚; otherwise, the malfunction may result.

WAAS/EGNOS

Select whether to use WAAS and EGNOS to increase the accuracy
of positioning.
Off: Cancels.
On: Activates.

Language

Select the language used for on-screen information and voice
guidance.
English US, Español, Français

Reset Calibration

Reset the calibration data in the following cases:
• When you reinstall the unit to another car.
• When you change Installation Angle.(☞ above)
• When you replace or rotate the tires.
Once this is carried out, the learning data is cleared. Calibration
starts when you exit from the menu. (☞ [9])

Traffic
Subscription

Subscribe to traffic services. ☞ [41]

Measuring Units

Select the measuring units for distance.
km / m, mi / ft

Coordinates

Select the measuring units for coordinate degrees.
Deg / Min / Sec, Deg / Milli / Micro

Car Position

If you find your current position displayed on a wrong place on the
map, use this setting to correct your position.
Adjust the position with

4¢5∞, then the direction with 5∞.

Setup Menu (continued)

*4 This setting is shared with the Language setting in AV Menu (☞

[90]).

KDNX5000_J.indb 46

23/1/07 7:00:02 pm