JVC KD-NX5000- - Manual (Page 86)

ENGLISH
86
On the unit:
1
Call up the preset list.
2
Select the preset number to call.
You can also access the preset number list
through Phone Menu
] List.
Dial Preset
11122223333
22233336666
44455556666
09845671234
99988887777
55566668888
To dial to the number acquired in Navigation
System
1
Search for a POI or a favorite
point which has telephone
number information.
2
Select [Call] .
[Hold]
• You cannot make an
international call through this
function.
0.7 mi
Presetting the phone numbers
You can preset up to six phone numbers.
1
Display the phone number you
want to preset by using one of
the Dial Menu items.
2
Call up the preset list.
[Hold]
• To preset a phone number using Phone
Number, select Store after inputting a
phone number.
3
Select a preset number.
You can use the following buttons on the
remote controller for the Bluetooth phone
operations.
ENT
6, PHONE: Answer the incoming
call.
BACK: End the call.
Number keys: Enter the phone number/PIN
code.
PHONE: Call up the redial list if pressed and
held.
or
[Hold]
Preset Memory Store
11122223333
22233336666
44455556666
09845671234
99988887777
55566668888
To adjust the volume
• This adjustment does not affect the
volume level of the other sources.
• You can adjust the microphone
volume level. ☞ [89]
To end the call
Press and hold MENU, DISP, BACK, ENT,
5 , ∞ , , or TRAFFIC.
• You can also access the Dial menu by
pressing PHONE on the remote controller.
• You can also access the redial list by
pressing and holding PHONE on the
remote controller.
• You can also access the voice calling screen
by pressing and holding MENU while the
Bluetooth Phone screen is displayed.
To call a preset number
On the remote:
While the Bluetooth Phone screen is displayed...
KDNX5000_J.indb 86 KDNX5000_J.indb 86 23/1/07 7:00:54 pm 23/1/07 7:00:54 pm