JVC TH-A10 - Manual (Page 58)

56
Cassette deck ————————————————
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on a cassette deck:
PLAY : Starts playing.
1 : Fast winds the tape from right to left.
¡ : Fast winds the tape from left to right.
STOP : Stops operations.
PAUSE : Pauses playing. To release it, press PLAY.
¶ REC : Press this button with the PLAY button to start
recording.
Press this button with the PAUSE button to enter
recording pause.
MD recorder ————————————————
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the MD recorder:
PLAY : Starts playing.
4 : Returns to the beginning of the current (or previous)
track.
¢ : Skips to the beginning of the next track.
STOP : Stops playing.
PAUSE : Pauses playing. To release it, press PLAY.
¶ REC : Press this button with the PAUSE to enter recording
pause. Then press PLAY to start recording.
After pressing TAPE/MD:
1 ~ 9, 0 : Selects the track.
Note:
• You can use either TAPE/MD button or the TAPE/MD CONTROL
button to activate the buttons listed above. If you press TAPE/MD,
the playing source also changes. On the other hand, if you press
TAPE/MD CONTROL, the playing source does not change.
VCR ————————————————————
You can always perform the following operations (with the remote
control mode selector set to “AUDIO/TV/VCR”): VCR POWER:
Turns on or off the VCR.
After pressing VCR or VCR CONTROL (with the remote control
mode selector set to “AUDIO/TV/VCR”), you can perform the
following operations on the VCR:
PLAY : Starts playing.
1
: Rewinds a tape.
¡ : Fast winds a tape.
STOP : Stops operations.
PAUSE : Pauses playing. To release it, press PLAY.
¶ REC : Press this button with the PLAY button to start
recording.
Press this button with the PAUSE button to enter
recording pause.
After pressing VCR:
1 ~ 9, 0 : Selects the TV channels on VCR.
CHANNEL +/– : Changes the TV channels on the VCR.
Note:
• You can use either VCR button or the VCR CONTROL button to
activate the buttons listed above. If you press VCR, the playing
source also changes. On the other hand, if you press VCR
CONTROL, the playing source does not change.
TV ————————————————————
You can always perform the following operations (with the remote
control mode selector set to “AUDIO/TV/VCR”):
TV/CATV/DBS POWER : Turns on or off the TV.
TV VOL +/–
: Adjusts the volume.
TV/VIDEO : Sets the input mode (either TV or VIDEO).
After pressing TV/DBS (with the remote control
mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on a TV:
CHANNEL +/– : Changes the channels.
1 – 9, 0, 100+ : Selects the channels.
TV RETURN
: Alternates between the previously selected
channel and the current channel.
Operating JVC’s Audio/Video Components
TH-A10[J]7/1 00.2.24, 14:59 56