JVC TH-A10 - Manual (Page 36)

34
Using the DVD player
(for Video CD) (for Audio CD)
Time display Time display
Programming the Playing Order of the
Tracks [PROGRAM]
You can play tracks on an Audio CD or Video CD
in the desired order.
7 While stopped
From primary remote control only:
1.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
2.
Use CURSOR 5/∞ to move the pointer [PROGRAM]
and press ENTER.
The color of [PROGRAM] changes.
3.
Select the tracks in the desired order using the
number buttons (1~10, +10).
Up to 16 tracks can be programmed. You may select the same
track more than once.
Selecting numbers
Selecting 1~10:
Press the relevant button between
1 and 10.
Selecting 11 or higher:
To select 13: Press +10 = 3 .
To select 24: Press +10 = +10 = 4.
To select 40: Press +10 = + 10 = +10 = 10.
If you mistakenly select the wrong track number press STOP
to delete the entered program.
Then reselect the tracks you wish.
Checking the Disc Time [TIME SELECT]
You can choose the displayed time mode for an
Audio or Video CD disc in the display on the front
panel and in the on-screen display.
7 For Audio CD: Any time
For Video CD: While stopped
From the remote controls:
1.
Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
2.
Use CURSOR
5/∞ to move the pointer to
[TIME SELECT].
3.
Press ENTER.
Each time you press ENTER, the time mode changes as
follows:
• During playback (for Audio CD)
3EACH (Elapsed time of the current track)
∞
EACH REMAIN (Remaining time of the current track)
∞
TOTAL (Total elapsed time of the disc)
∞
TOTAL REMAIN (Total remaining time of the disc)
• While stopped
3EACH REMAIN (Remaining time of the current track)
∞
TOTAL (0:00)
∞
TOTAL REMAIN (Total remaining time of the disc)
∞
EACH (0:00)
Note:
• When you select “EACH REMAIN” while stopped, you can
change the track by pressing ¢ or 4.
1
2
3
4
(for Video CD) (for Audio CD)
Selected track number
Primary remote control Secondary remote control
1 2
•
3 1 2
•
3
TH-A10[J]4/1 00.2.24, 14:53 34