Juniper Networks IDP 800 User Manual
Page 46
IDP 75, 250, 800, and 8200 Installation Guide
32
Adding Your Sensor to NSM
7.
Verify the SSH key fingerprint to prevent man-in-the-middle attacks:
a.
Connect a PC or terminal to the IDP sensor using the console serial port.
b.
Log in as root.
c.
Type
cd /etc/ssh
and press Enter.
d.
Type ssh-keygen -l -f ssh_host_dsa_key and press Enter.
You see something similar to this:
1024 f4:91:d0:04:b7:61:00:77:45:c3:cc:bd:af:b3:5b:a2 ssh_host_dsa_key.pub
8.
After you have verified the key, click Next to display device information
retrievable by NSM (Figure 16). This takes a moment.
Figure 16: Add Device Wizard - Retrieved Settings
9.
Verify that the device type, OS version, device serial number, and device mode
are correct.
10. Click Next to add the sensor to NSM as a managed device. (See Figure 17.)
Figure 17: Add Device Wizard - Adding the Device
11. Click Next to have NSM import settings already present on the sensor. (See