beautypg.com

Dvd video marks, Placing a disc, Disc information – JVC DR-DX5SEK User Manual

Page 9

background image

Masterpage:Right+

EN

9

Filename [DX5SEK_04DiscInfo.fm]

DISC INFORMATION

Page 9Thursday, 10 November 2005 16:34

DVD VIDEO Marks

Sometimes marks are printed on a DVD disc and/or on its
packaging to indicate information regarding the contents and
functions of the disc. Check the marks indicating the contents and
functions of the disc. Note, however, that in some cases a disc may
not include a mark even for a function it supports.

Marks related to video

Marks related to audio

Placing A Disc

Opening the disc tray
Press

M to open the disc tray.

Pressing the button again closes the disc tray.

Use the button to open and close the disc tray.

Do not block the disc tray with your hand while it is opening or
closing as this may result in hardware failure.

Do not place unplayable discs or any object other than a disc on
the disc tray.

Do not press down strongly on the disc tray or place any heavy
objects on it.

Discs without cartridges

Place the disc on the disc tray with the label side facing up. Since
disc size changes depending on the disc to be played back, be
sure to correctly align the disc with the grooves for its size. If the
disc is not in its groove, it may be scratched or otherwise damaged.
To insert an 8 cm disc, place it according to the inner groove.

DVD-RAM discs contained in cartridges
Double-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the side
you wish to play back or record facing down. If you insert the disc
with

ASide AB facing down, programmes are recorded on the side

A.

Single-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the label
side facing up.

Number of subtitles

Number of angles

Recorded under the
standard 4:3 aspect
ratio

Screen includes black
bands at the top and
the bottom of image
which has a standard
4:3 aspect ratio (letter
box)

Video playback is in Wide video mode (16:9) on
wide televisions, but in letter box on televisions
with standard 4:3 aspect ratio.

Video playback is in Wide video mode (16:9) on
wide televisions, but pan and scan is used on
televisions with standard 4:3 aspect ratio (either
the left or right side of the image is cut-out).

Number of audio tracks

Dolby Digital mark
It has been developed by Dolby Laboratories as
a digital surround system.

DTS (Digital Theater Systems)
You can enjoy DTS audio if you connect an
amplifier with a built-in DTS decoder to the
DIGITAL OUT connector of the unit.

DV/HDD/DVD

DVD –

DV IN/ OUT

INSERT

SELECT

A.DUB

REC MODE

DV

Disc tray

DX5SEK_00.book Page 9 Thursday, November 10, 2005 4:35 PM