Basic operations on hdd deck, Basic recording, A pg. 37 – JVC DR-DX5SEK User Manual
Page 37
Masterpage:Right0
EN
37
Filename [DX5SEK_07HDD Operation.fm]
Page 37
Thursday, 10 November 2005 16:34
BASIC OPERATIONS ON HDD DECK
1
Press DV/HDD/DVD SELECT on the unit repeatedly or HDD on
the remote control so that the HDD lamp lights up on the unit.
2
Press PR +/– or the number keys to select the channel you
wish to record.
3
Press REC MODE repeatedly to select the recording mode,
then press ENTER.
●
Each time you press REC MODE, the recording mode changes
as follows:
XP N SP N LP N EP N FR (60-360*, 420, 480) N (Back to
the beginning)
* The value is selectable from 1 to 6 hours in 5-minute intervals by
pressing
D E
repeatedly after selecting
AFR60–FR360B. To change
the value in 30-minute intervals, press and hold
D E
.
●
For details on the recording mode, see the right column.
4
Press
R on the unit to start recording. Or while holding R, press
I on the remote control.
●
The HDD recording lamp lights up on the unit.
5
Press
o twice to stop recording.
●
Pressing
o once displays the confirmation message to stop
recording. Press
o again to terminate recording.
NOTES:
●
Continuous recording for over 48 hours is not possible.
●
It is not possible to record on both DVD and HDD simultaneously.
●
It is not possible to record from this unit’s built-in tuner to the DV
deck.
Pause recording on HDD deck
It is not possible to pause recording. Pressing
W initiates Live
Memory Playback.
However, it is still possible to pause recording only when recording
the channels of external sources (
AL-1B, AL-2B, AF-1B, and ADVB).
While holding
R, press W on the remote control. To resume
recording, while holding
R, press I on the remote control.
No operation can be made with the buttons on the unit.
Recording Mode
MPEG2 format is used as recording format. As a guide for picture
quality, the
AbpsB unit is used to represent how much data can be
recorded per second. The larger this value is, the better the picture
quality becomes but more capacity is required for the recording.
Select XP or SP for programmes where quick movement occurs,
such as sports programmes, and LP or EP for talk shows, etc. with
relatively less movement.
●
For details on FR mode, refer to
NOTE:
The maximum recording time stated in the above table are the
approximate time under unused condition.
Basic Recording
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
ATTENTION:
The HDD on the unit requires approximately 20 seconds to start
up after the unit has been turned on, during which no operation
can be made.
I
R
o
0-9
REC MODE
HDD
PR+/-
ENTER
W
CABLE/SAT
DVD
TV
R
o
DV/HDD/DVD
SELECT
REC MODE
PR +/-
HDD lamp
Recording mode
Maximum recording time (approx.)
XP
53 hours
SP
109 hours
LP
218 hours
EP
328 hours
FR480
473 hours
DX5SEK_00.book Page 37 Thursday, November 10, 2005 4:35 PM