Nokia N77 - Manual (Page 66)

Contacts (phonebook)
66
To delete a contact card in Contacts , select a card, and
press . To delete several contact cards at the same time,
press and to mark the contacts, and press .
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1 In Contacts , select a contact, and press .
2 Select Options > Defaults .
3 Select a default to which you want to add a number or
an address, and select
Assign .
4 Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.
Copy contacts
To copy names and numbers from a SIM card to your
device:
1 Press , and select Contacts > Options > SIM
contacts > SIM directory .
2 Select the names you want to copy.
3 Select Options > Copy to Contacts .
To copy contacts from your device to your SIM card:
1 Press , and select Contacts .
2 Select the names you want to copy.
3 Select Options > Copy to SIM direct. , or Options >
Copy > To SIM directory . Only the contact card fields
supported by your SIM card are copied.
SIM directory and other SIM services
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider or other vendor.
Press , and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialling contacts . This setting is
only shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select
Options > Activ. fixed dialling . You need
your PIN2 code to activate and deactivate fixed dialing or
edit your fixed dialing contacts. Contact your service
provider if you do not have the code. To add new numbers