Nokia N77 - Manual (Page 26)

Camera
26
online’, p. 41. This option is not available during an
active call.
• To send the image to a call recipient during an active
call, select Send to caller (only available during an
active call).
• To tag images to the print basket for later printing,
select Add to Print Basket .
• To print the picture, select Print . See ‘Image print’,
p. 39.
• To capture a new image, select New image .
To rename the image, select Options > Rename image .
To use the picture as wallpaper in the active standby,
select
Options > Set as wallpaper .
Take pictures in sequence
The sequence mode is available only in the main camera.
To set the camera to take six pictures or the desired
number of pictures in sequence (if enough memory is
available), in the active toolbar, select
Sequence mode .
To take six pictures, select Burst > OK . To capture the
pictures, press the capture key.
To take two or more pictures in a sequence, select the
desired time lapse, and
OK . To capture pictures using the
selected time lapse, press the capture key. To stop taking
pictures, select Cancel . You can capture up to 100 images,
depending on the available memory.
After you take the pictures in the burst mode, they are
shown in a grid on the display. To view a picture, press
to open it. If you used a time lapse, only the last taken
picture is shown on the display. To view the other pictures,
select
Options > Go to Gallery .
You can also use the sequence mode with the self-timer.
When using the self-timer, the maximum number of
pictures is six.
To return to the sequence mode viewfinder, press the
capture key.
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
in the active toolbar, select
Self timer > 2 seconds , 10
seconds , or 20 seconds . To activate the self-timer, select
Activate . The device beeps when the timer is running. The
camera takes the picture after the selected delay elapses.
To switch off Self timer , in the active toolbar, select Self
timer > Off .
You can also use the self-timer in the sequence mode.