JVC RX-F10S - Manual (Page 38)

34
Creating realistic sound fields
DSP modes
HALL1/2,
LIVE CLUB,
DANCE CLUB,
PAVILION,
THEATRE1/2,
ALL CH ST.
Using the Surround/DSP modes
Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below.
• The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the
surround channels. For example, (3/2) indicates that the signals are encoded with three front signals (left/right/center) and two (stereo)
surround signals.
• For EX/ES setting, see page 20.
Incoming signal
Dolby Digital EX
Dolby Digital (3/2, 2/2)
Dolby Digital
(3/1, 2/1, 3/0, 1/0)
DTS-ES Discrete 6.1 ch
DTS-ES Matrix 6.1 ch
DTS-ES 96/24 Matrix
DTS, DTS 96/24 (3/2, 2/2)
DTS (3/1, 2/1, 3/0, 1/0)
Incoming signals Available Surround modes Available DSP modes
Dolby Digital (Dual Mono)
DUAL MONO
DTS (Dual Mono) HALL1/2, LIVE CLUB,
Dolby Digital (2-channel) DANCE CLUB, PAVILION,
DTS (2-channel) PLII MOVIE, PLII MUSIC, THEATRE1/2, MONO FILM,
Linear PCM NEO:6CINEMA, NEO:6 MUSIC ALL CH ST.
Analogue
DVD MULTI None None
Surround back
speaker setting
(SML/LRG/NO)
SML/LRG
NO
SML/LRG
NO
SML/LRG/NO
SML/LRG
NO
SML/LRG
NO
SML/LRG
NO
SML/LRG/NO
EX/ES setting
(AUTO/ON/OFF)
AUTO/ON
OFF
AUTO/ON
OFF
ON
AUTO/OFF
ON
AUTO/OFF
AUTO/ON/OFF
AUTO/ON
OFF
AUTO/ON
OFF
AUTO/ON
OFF
AUTO/ON
OFF
ON
AUTO/OFF
ON
AUTO/OFF
AUTO/ON/OFF
Virtual Surround Back
If you have connected (and activated) the surround speakers,
you can use Virtual Surround Back when playing back Dolby
Digital EX or DTS-ES software without connecting the
surround back speaker.
This function creates the great surround effect from the behind
as if you have connected the surround back speaker. The
VIRTUAL SB (Surround Back) indicator lights up on the
display.
NOTES
• For some Dolby Digital EX software, Dolby Digital 5.1-channel
reproduction (“DOLBY D”) is applied.
• DTS 96/24 processing is not applied when the EX/ES setting is
activated. If you want to apply the processing, set the EX/ES
setting to “EX/ES : OFF” (see page 20).
• You cannot select “ALL CH ST.” when the surround speakers
are set to “NO” in the speaker setting (see page 18).
Surround mode
DOLBY D EX
DOLBY D
DOLBY D (Virtual Surround Back)
DOLBY D
DOLBY D EX
DOLBY D
DOLBY D (Virtual Surround Back)
DOLBY D
DOLBY D
ES DISCRETE
DTS
DTS (Virtual Surround Back)
DTS
ES MATRIX
DTS
DTS (Virtual Surround Back)
DTS
DTS NEO:6
DTS
DTS (Virtual Surround Back)
DTS
DTS
31-35RX-F10[B]_f.p65 04.2.13, 16:41 34