Connecting video components, Scart connection – JVC RX-F10S User Manual
Page 11
7
Getting star
ted
VCR
TV
DVR/DVD
AV IN/OUT
NOTE
When the TV is equipped with multiple SCART terminals, refer to
the TV manual to check the available video signals for each
terminal, then connect the SCART cable correctly.
Connecting video components
SCART connection
You can enjoy pictures and sounds from playback components
simply by connecting with the SCART cable.
• If your video components have digital output terminal, also
connect them using the digital terminals explained in “Digital
connection” (see page 11). By using these terminals, you can
get better sound quality.
CAUTION:
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and this receiver, the
sound output through this receiver may be distorted.
TV
VCR
DVD recorder or DVD player
SCART cable
(supplied: 1 cable)
SCART Terminal Specifications
Terminal name
TV
VCR
DVR/DVD
Audio
L/R
⅜
⅜
⅜
Input
Composite
⅜
⅜
⅜
Video
S-video (Y/C)
−
⅜
⅜
RGB
−
⅜
⅜
Audio
L/R
⅜*1
⅜
⅜
Output
Composite
⅜*2*3
⅜*2*3
⅜*2*3
Video
S-video (Y/C)
⅜*3
−
−
RGB
⅜*3
−
−
T-V LINK
⅜*4
⅜*4
⅜*4
*1 Only when TV Direct is in use (see page 14).
*2 The signals input from a SCART terminal cannot be output
through the same SCART terminal.
*3 The video format of the output video signals are consistent
with that of the input video signals. For example, if S-video
signals are input to this receiver, no signals other than S-
video signals can be output from this receiver.
Refer to the manuals supplied with the video components to
check the setting of the input/output video signals.
*4 The signals for the T-V LINK function are always going
through the receiver.
⅜: Available, –: Not available
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
Turn off all components before making connections.
• Illustrations of the input/output terminals are typical
examples. When you connect other components, refer also
to their manuals since the terminal names actually printed on
the rear vary among different components.
CONTINUED ON THE NEXT PAGE
06-11RX-F10[B]_f.p65
04.2.13, 16:40
7